75 C120 Automatic ...snowblower question

[horsenut 1]

youtube walk around as promised of the C120 w blower attachment

[TT-(Moderator) 1,131]

Put the belt on correctly and it shouldn't hit the axle:

[horsenut 1]

duh...thanks. seems so tight, I didnt think any other routing would work...lol go figure! :-)

[dodgeramsst2003 3]

Thank you for the walk around of the blower mounted!

[horsenut 1]

Thank you for the walk around of the blower mounted!

Thanks for the blower! I'll grab some photos of it doing it's duty in a couple of weeks

[can whlvr 993]

good to see you figured it out,like i said ive put it on wrong and found how to put it on right here on red square,this is what happens when we get older equipment and it get no paper work like operating manuals,good thing for this site

[horsenut 1]

Oh ya! Misses the axle by 2" the spring works much better...Old Man winter...lets see what ya got!!!

[shameless 3]

Oh ya! Misses the axle by 2" the spring works much better...Old Man winter...lets see what ya got!!!

Hey HorseNUT:

It looks like the belt is touching the axle.

Is it just my eyes?

[horsenut 1]

Oh ya! Misses the axle by 2" the spring works much better...Old Man winter...lets see what ya got!!!

Hey HorseNUT:

It looks like the belt is touching the axle.

Is it just my eyes?

Could be the angle coupled with the short focal length GoPro HD cam...it is 2" safely above the axle...

the routing of the belt was critical...

[shameless 3]

Hey HorseNUT:

Thanks for clarification.

[horsenut 1]

Hey HorseNUT:

Thanks for clarification.

No biggie buddy...Merry Christmas!!!

[varosd 1,185]

your C-120 looks like its in good condition! now where is the white stuff?

[horsenut 1]

your C-120 looks like its in good condition! now where is the white stuff?

Thanks Varosd...but not yet, I don't have the chute on...and for my house, I cannot use the Torq (tractor is to rare to use), so I'd be relegated to doing the blowing with a 222 because the Onan in the 446 has a busted rod...I have the rod I just haven't had time to get it in place...so if the 'white stuff' holds off for another 2 weeks it won't break my heart...and I don't have a blower for any of my speedexes...

[bowtieguy 334]

Probably a "typo" but do I see a reference to 2 p/n's?.....9750 and 9570....the 69" belt works fine on my thrower but it is a Wheel Horse belt.....not an automotive belt.

[horsenut 1]

The belt on this is a 69x5/8 kevlar belt. so long as the dimensions are the same and the tensile strength isn't exceeded I think it'd be ok. That said, I believe this belt would work just fine...I have had excellent results using the kevlar belts from TSC on many 'other' applications...if not I'll replace it, the belt is $20