3-point draw bar a frame thingy

[rustbucket 4]

found this on epay think the guy has a pretty cool idea going with the set up.

http://cgi.ebay.com/A-Frame-Category-0-3-P...id=p3286.c0.m14

[HorseFixer 2,012]

Doesn't look hard to make one, 85 bucka roos plus shipping.... A Lil pricey for what it is!

Duke

[kpinnc 11,899]

Jason,

You can make one for cheaper than that.

$85-100 is a bit steep, and of course, by the time you ship one of these, you've probably got another $50 in the whole thing...

The one I made is much simpler, meaning I have mine drilled to accept a "clevis" adapter instead of being welded on, and my crossbar is flipped backwards from the way he has his. Other than that, they are about the same. They are very easy to make.

If you have some mild steel 1/4 inch flat bar, a vice, a torch (for bending), and a welder, you can throw one of these together in about an hour. I can dig up the link I found with all the dimensions, and you'll be all set.

Here's mine:

Let me know if you want the link.

Kevin

[rustbucket 4]

i was not planing on buying it i was just saying was a cool idea hoe he added the clevis to the frame so you can run 3-point and clevis hitch implaments.

[kpinnc 11,899]

OK, my bad...

Kevin

[rustbucket 4]

if anything ill find someone here who has awsome fab skills and maybe beg hehe but i not lookin to fork over that kind a cash on an a frame.