Dead_horse 0 #1 Posted November 21, 2011 Im looking for belt guard dimensions for my 857. Does anyone have this info? What other models can I get the guard off of. I have sheetmetal and was going to fab one. Thanks Share this post Link to post Share on other sites
Retired Wrencher 5,329 #2 Posted November 21, 2011 :dunno: D/HorseI think it may easier to get a part off E-Bay or ask Kelly if he has one laying around $$$ would not much investment. Good luck I will let u know if I see one. Gary B............. Share this post Link to post Share on other sites
rmaynard 15,309 #3 Posted November 22, 2011 What other models can I get the guard off of.According to the parts cross-reference, the same belt guard (part number 4993) is found on: 604, 654, 704, 854, 855, 856, 867, 1055, & Commando 8. Share this post Link to post Share on other sites
Kelly 1,029 #4 Posted November 22, 2011 Well to start I don't have any belt guards that are correct for you, but i have some that will work, Bob the list you posted are ones that will work, except for the 1055 it is special for the 1055 only, that will not fit at all, all round hoods (front engine) tractors with a Kohler and any short frame stick shift tractor with a kohler will work, but to be correct you will need one off a 67 to 69 short frame tractor that is kohler powered, they will not have the indent on the side were they put the model no. on the older tractors. Share this post Link to post Share on other sites
rmaynard 15,309 #5 Posted November 22, 2011 ...Bob the list you posted are ones that will work, except for the 1055... Busted. I misread the list. When I looked at the drawing, I didn't notice that there was a second number for the 1055. Good catch Kelly :dunno: Share this post Link to post Share on other sites
Dead_horse 0 #6 Posted November 22, 2011 Ok thanks, Ill search around at the local mower repair/salvage yard for one. Share this post Link to post Share on other sites
tunahead72 2,386 #7 Posted November 23, 2011 According to the parts cross-reference, ... Bob, I know I've seen it, but where is this cross-reference you're talking about? Thanks! Share this post Link to post Share on other sites