520h stripped transmission drainplug

[cheesegrader 433]

The latest discovery.

I was going to change the hydro fluid/filter this weekend, but Nooooooooo!

The plug is stripped, partially cored out, and strategically covered with grease to hide the mess

How thick is this plug?

I'm a little worried about drilling through and getting drillings into the transmission.

Does anyone have a part number or any ideas about a replacement?

I can't find it on the TORO parts diagram!

Thanks

[dgoyette 12]

http://www.mowpart.com/p135649/Plug-Pip ... 6f7jsjq9d5

Here is the plug. I got one off E-bay not too long ago too. It is a 1/4" allen head pipe plug.

Good luck with getting it out. Two options I have heard of are, of course the screw extractor, and I also think one dude welded a nut to the plug and then it came out real easy.

[wh79d160 52]

This is how I got the one out on one of my D's. Just tap it in until you feel it bottom out. I think it's a T-45 torx. Worked great!!! I replace all mine w/exterior hex heads. Good luck :dunno:

[can whlvr 993]

ive definatly used a large easyout,i had to grind the extractor down a little so the point didnt bottem out on the bottom of the plug,they come out fairly easy because of the oil it plugs,not usually too hard too get out

[cheesegrader 433]

Man, am I glad this site is back up.

Not only do I get answers to my painfully stupid questions,

I get pictures! :dunno:

[wh79d160 52]

Some one on this site passed this idea on to me years ago when I had the same problem. It seems to come up from time to time so I just keep the picture on file. It should probably go in the FAQ thread.

[shootinok 15]

I needed a plug because my hydro was missing one when I got it.

I used a 1/4" brass pipe plug - picked up at lowes for a few bucks.

Fit just perfect.

[TT-(Moderator) 1,147]

Some one on this site passed this idea on to me years ago when I had the same problem.

:wh: