Rear Power Take-off for C-195

[C-195 0]

Does anyone know where one can find the v-belt for the rear power takeoff for the Wheelhorse C-195? It is WH# 109829. It's a 4L belt with a length of 153.25".

[CasualObserver 3,408]

First Welcome, jump in and post often.....This very topic actually was just brought up not too long ago....

Please reference this thread... it has your answers.

http://www.wheelhorseforum.com/index.php?showtopic=2816

[T-Mo-(Moderator) 4,496]

:whistle:

I was going to respond that I've exhausted all the links in the "Links" section here to no prevail. But it looks like the link to the thread Jason posted might be the answer you're looking for. Good luck.

Again, welcome to the site.

[DMESS 24]

C-195, did I happen to talk to you about these belts at the WHCC show this past Weekend? Is your name Jim by chance?

[C-195 0]

Yes we did. So far, no luck.

[Teddy da Bear 11]

I do not know anything about your particular situation.

But what I have done in the past is adapt the next size

belt to do the job. Most wheel horse applications have

an "ideal" size belt. But the engineers at wheel horse

must have been doing their homework, because in many

situations, belts of larger or smaller sizes can work.

In one particular instance: My sickle bar mower. The belt

is suppose to be 141 inches. Now no one makes a 141"

belt. It is just not a common size. Wheel horse might

have made the belt, but most came in 2 inch increments

after 100 inches. So I was able to use the 140 inch belt

that Napa had. Yes it goes on a little tighter, but it still

works. And if I wanted the "fit" that wheel horse intended

I could always change the diameter of one or both of the

idle pulleys. I could likely run a 142 inch or a 138 inch belt

too.

So I was wondering if you could change something up to

better use a more common size belt?

[C-195 0]

I just found one at 158 in. I am going to try that. Thanks

[Teddy da Bear 11]

But you said it was suppose to be 153 1/4.

Now your able to jump 5 inches and use one that is 158????

[DMESS 24]

Jim, I'm glad you decided to check us out and join in the "madness"! Seriously, this site is a great source of information and I think you will find it to be superior to other WH sites you may have been disapointed with in the past.

[Teddy da Bear 11]

Let us know how it works out for ya.