bean 85 #1 Posted September 23, 2011 hello, i have a clinton(i think, no tag) engine on my rj 58. can anyone identify the model? I tried to post pics, but they were too large. i could email them to someone. thanks Share this post Link to post Share on other sites
Rooster 191 #2 Posted September 23, 2011 email them too me roosterlew@hotmail.com I will post them for you. Share this post Link to post Share on other sites
bean 85 #3 Posted September 23, 2011 email sent. thanks Share this post Link to post Share on other sites
rmaynard 15,758 #4 Posted September 23, 2011 If it's original, the Wheel Horse cross-reference bulletin says that the RJ35, RJ58, and RJ59 had either a Kohler K90 or a Clinton B1290-1107. Share this post Link to post Share on other sites
Rooster 191 #5 Posted September 24, 2011 Here you go, sorry it took me so long, been a busy day! Share this post Link to post Share on other sites
VinsRJ 723 #6 Posted September 24, 2011 Either a 1200 or B1290 can be correct for a RJ58-9. With out the engine tag its hard to rell from the exterior. Share this post Link to post Share on other sites
bean 85 #7 Posted September 24, 2011 from a few earlier posts, I assume the 1290 has a tapered shaft and the 1200 has a straight 3/4" shaft. is that correct? this engine is 3/4" straight shaft. Share this post Link to post Share on other sites
TT-(Moderator) 1,145 #8 Posted September 24, 2011 1200 & 1290 are the engine series (model number) and have nothing to do with the size or shape of the PTO end of the crankshaft. (variances are identified by the numbers after the hyphen) The 1200 is 3.5hp and the 1290 is 4hp Share this post Link to post Share on other sites
bean 85 #9 Posted September 24, 2011 ok, thank you. I wasn;t sure this was a clinton. I think we have determined that it is either a clinton 1200 or 1290, probably the 1290. :thumbs2: Share this post Link to post Share on other sites
