60 inch deck pto belt

[liketoplayto 6]

Does anyone know the belt size or belt number for the pto belt for a 60 inch deck on a 520 h tractor 1996.

thanks wes

[BOWTIE 226]

HELLO, I THINK IT SHOULD BE 113072 OR 103" X 1/2". DO A LITTLE RESEARCH BEFORE ORDERING ONE.

BOWTIE IN OHIO

[C-Series14 15]

Just for info, there is a belt usuage chart in the manuals group that list what belts are used on what attachments...

Also a drive belt chart.

This is copied from the belt usuage chart...

60" Side Discharge 78390 112449 113072

112449 is the deck belt, 113072 is the PTO belt. This is a 1996 deck...

[cheesegrader 433]

Toro 113072 is what I have for the part number.

It was too rich for my blood,

so I use a 102" x 1/2" from NAPA for less than half the price.

The new 102 doesn't leave much room to tighten in the future.

I wonder if the 103 will be slack when it starts to stretch.

[stevebo-(Moderator) 8,330]

I bought the pto belt for mine (Gates A100) and it lasted about 3 mowings I should have listened to those who said get the toro belt I am in need of one again now. Imagine this I have about 13 tractors and no back up mowers at the moment....

[liketoplayto 6]

Thanks guys so apreciated for the info

thanks wes

[jimbo7921 8]

I just did both belts on my deck with PIX Kevlar wrapped belts, the PTO is 103 by 1/2 and the other is 142 by 5/8 i believe. It was going to cost 160 for both in Canada, these two cost 60 and the only thing that sucks is there blue.

[JHW 0]

I have a 520HC and it takes a 102 inch by 5/8 inch belt to drive thru mule drive and pull 3 blades on 60 inch deck

Edited July 20, 2019 by JHW
wrong number

[gwest_ca-(File Mod) 11,033]

On 7/19/2019 at 9:06 PM, JHW said:

I have a 520HC and it takes a 102 inch by 5/8 inch belt to drive thru mule drive and pull 3 blades on 60 inch deck

Surprised you got a 5/8" wide drive belt on.

Click on the picture

Garry