woodchuckfarmer 333 #26 Posted April 20, 2013 I just put a fram 3682 on my 520 ,about 4 inches long......$4.10 at autozone Share this post Link to post Share on other sites
racin_ny 25 #27 Posted June 7, 2013 THIS IS A LIST OF PARTS THAT I HAVE USED... Engine Oil filter WIX 51762 Transmission filter WIX 51410 Main Drive Belt 114895 Mower Drive Belt 113072 48" DECK Mower Belt 112449 48" DECK Mower Blades KIT 112947 Fuel Filter WIX 3133 - MANY DIFFERENT ONES WILL FIT Air Filter WIX 46094 Spark Plugs Champion RH14-YC .025 inch gap Fuses System Fuse 30 Amp Gauge Fuse 25 Amp Light Fuse 15 Amp Air Filter Fram CA -140 (Does not come with the prefilter) Share this post Link to post Share on other sites
608KEB 795 #28 Posted February 13, 2014 So it would be safe to use the Wix 51762 or Fram 3614 oil filter for my Onan P220G? And use the Wix 51410 for the transmission? Share this post Link to post Share on other sites
varosd 1,185 #29 Posted February 13, 2014 So it would be safe to use the Wix 51762 or Fram 3614 oil filter for my Onan P220G? And use the Wix 51410 for the transmission? yes, there are multiple posts on the personal preferences of folks in regards to engine oil and tranny filters (anti drain back etc). I'm using the OEM tranny filter from the toro dealer, it still has the Wheel Horse logo on it! Share this post Link to post Share on other sites
squonk 41,309 #30 Posted February 13, 2014 Frams are junk. Use Napa (Wix). I cut open an OEM Toro trans filter once. Nothing to write home about. Wish I took pics. If I ever get a hold of another used one I'll take them. Napa 1410 is a pure Hydraulic/ power transmission filter built twice better. 2 Share this post Link to post Share on other sites
608KEB 795 #31 Posted February 13, 2014 I picked up both wix filters today. Share this post Link to post Share on other sites
gregg'shorses 77 #32 Posted February 20, 2014 Napa 1374 crosses to a Baldwin # BT223 and 1762 crosses to B243 http://catalog.baldwinfilter.com/ They are a top of the line filter, plus they are RED !! Share this post Link to post Share on other sites
608KEB 795 #33 Posted August 23, 2014 Where do I pick up the rubber seal that goes around the oil filter? Share this post Link to post Share on other sites
Martin 2,133 #34 Posted August 23, 2014 (edited) Onanparts.com is where i got mine, part number is below. you can get them through toro i think, but not 100 % on that, not sure on the toro part number though..... Edited August 24, 2014 by Martin 1 Share this post Link to post Share on other sites
JPWH 6,092 #35 Posted January 20, 2015 I know I should know this and saw a post about a year ago but I cannot find it while searching it. I need a cross over oil filter that I can get at a parts store as I need to change the oil. Fram, Wix, purolator etc. Can anyone help me out? Thanks! Share this post Link to post Share on other sites
rmaynard 15,588 #36 Posted January 20, 2015 (edited) NAPA Gold 1762 is what I put on my P-216G Edited January 20, 2015 by rmaynard Share this post Link to post Share on other sites
.JPG.9f2ecb26065c66527b0730084ab7fc7a.thumb.jpg.7dc8a04d9a53d44ee2b23f26ee94496f.jpg)