Jump to content

 
Countdown To Christmas!
 

 
Sign in to follow this  
bmay432

transmission rebuild

Recommended Posts

bmay432

I have a 551 suburban that I had to open the trans, on. I can't find a gasket for it so I will just make one I guess. Any suggestions on what type of material to use?

Share this post


Link to post
Share on other sites
 
rmaynard

Part #3912. Should be available from any Toro dealer for about $4.00

Share this post


Link to post
Share on other sites
 
rmm727

Would that be the same gasket for a rj58-59 or Suburban 400?

Share this post


Link to post
Share on other sites
 
jdog_kustoms

no the 551 has a cast iron 2 peice tranny the rj and 400 have the castiron center section and the 2 steel plates on the sides

Share this post


Link to post
Share on other sites
 
stevasaurus

The gaskets for the RJ's transmissions are no longer available, you have to cut your own now. The gaskets for the cast iron Uni-drives were still available...I bought 4 of them last year. The gasket material I used for the RJ trans came in a 1' X 4' roll for a few bucks. It is made by Fel-Pro and called KARROPAK. Tan in color, it appears to be about 1/32" to 1/16" thick. It is gasket material, not cork. I bought it from AutoZone.

There is nothing wrong with using cork, this stuff was there and I tried it...worked for me with no leaks and I did not use any gasket sealer.

Share this post


Link to post
Share on other sites
 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

×
  • Create New...