dobeleo 7 #1 Posted May 24, 2011 I borrowed my neighbors old Sears Craftsman Roto Spader / Tiller and am cleaning it up for him. This machine is a little beast for its age. My question, what type of oil is in the transmission? I am sure it has never been changed. I could not find a manual anywhere. It has a lever shifter on it for high and low tilling speed and reverse. I could not find the manual on the Sears website, too old. I would date this machine from the 70's. The frame is gold in color. It looks like it has a 5 or 6 horse engine. The engine starts on the first pull! I tilled 3 small gardens with it over the weekend, I am sore! Thanks all for your help! Dan Shorewood, Illinois Share this post Link to post Share on other sites
dobeleo 7 #2 Posted May 26, 2011 I went to my neighbors house, who loaned me the tiller, and told him I changed the oil ad was going to wash it before I brought it back. He said he rarely uses it and that I could have it since he knows I will take good care of it. Dan Shorewood, IL Share this post Link to post Share on other sites
perry 82 #3 Posted May 26, 2011 your good deed payed off i have one of them roto-spaders. it should take 80W gear lube. pull the plug out and smell it. i got mine from my grampa . he must have tilled every ladys garden on the street. it has been well used and looks beat. the briggs engine runs , but spits and sputters, and smokes bad. still going and still tilling up dirt. i mostly only use to cultivate between rows. Share this post Link to post Share on other sites
Lane Ranger 10,968 #4 Posted May 26, 2011 The Sears Roto-Spader is a very good piece of equipment. We own one. It was considered an option/attachment for the wheel horse at one time. Believe it or not this 21 page manual is posted on the Wheel Horse.org website. Here are the links : http://www.wheelhorse.org/manuals.html http://www.wheelhorse.org/manuals/Sears%20...0917-251880.pdf The engine oil plug and the transmission fluid plug are located on PAGE 5 in the Figure 7 drawing FYI. :hide: Share this post Link to post Share on other sites
perry 82 #5 Posted May 26, 2011 i have sold a couple of the pull-behinds. they seemed decent. my old jolopy is a walk behind. Share this post Link to post Share on other sites
catman81056 3 #6 Posted May 26, 2011 Did it look anything like this? Share this post Link to post Share on other sites
perry 82 #7 Posted May 26, 2011 nice conversion. mine is just the little guy. Share this post Link to post Share on other sites
dobeleo 7 #8 Posted May 28, 2011 Mine is a walk behind, but that is the gearbox it has on it! My friend has seen me working on my 312-A so he knew I would appreciate his old tiller. I will add a picture this weekend after I clean it up this weekend! 30 weight oil in the transmission per the manual. Thanks all for your comments! Dan Shorewood, IL Share this post Link to post Share on other sites
