JimD 3,345 #1 Posted May 10, 2011 I've been putting off getting into the transmission on the B-80 for a long time. Yesterday I tore into the tractor and got the transmission out. Upon removeing the hubs I found this... a nice chunk torn out of the key way. The chunk is laying on the axle housing in the pic. That's the driver side axle. Here is the wallowed out key way on the other axle... And of course the hubs are torn up to match... The gears and bearings all appear to be ok. Time to round up some parts and put this one back to work. :hide: Share this post Link to post Share on other sites
racinfool40 202 #2 Posted May 10, 2011 :hide: Dang Jim, you did mean a chunk was out of the key way!!!Never seen one do that before!!!!!!!I'm sure we can hook you up with some parts!! Other than that don't look to bad!! Maybe a New reverse Idler?? :WRS: Share this post Link to post Share on other sites
JimD 3,345 #3 Posted May 10, 2011 Looks like you saw one I missed on the idler gear Mike. I was more concerned with the bearings. Shoot me a pm on the hubs and axles. 1 inch hubs and 1 inch x 10 5/8 axles. Share this post Link to post Share on other sites
sorekiwi 761 #4 Posted May 10, 2011 I'm fairly sure I have a pair of axles here Jim. Give me a holla if you get stuck! Share this post Link to post Share on other sites
JimD 3,345 #5 Posted May 10, 2011 I'm fairly sure I have a pair of axles here Jim. Give me a holla if you get stuck! Will do Mike, thanks. :hide: Share this post Link to post Share on other sites
daveoman1966 3,762 #6 Posted May 10, 2011 I am in n/w PAS at zip 16433 and I have the COMPLETE trans for the B-80. Nothing wrong with it, except that I own it..... Will sell for a reasonable price and you can just drop it in and go. my email is: daveoman@windstream.net Send me an email and I'rreturn pics and details to you. I can ship this, but you may want to make a drive here instead. I have a lot of other B and C series parts too. Attached Image Share this post Link to post Share on other sites
stevasaurus 22,863 #7 Posted May 11, 2011 Trans looks to be in good shape Jim...considering the abuse the axles and hubs took. I don't see what Mike is seeing with the reverse idler...of course...I am 2 more states away from you guys. :hide: Share this post Link to post Share on other sites
JimD 3,345 #8 Posted May 14, 2011 Well, it was off to see Sorekiwi (Mike) this morning to pick up the axles for the B-80. I took my hubs along and he broached new key ways in them while I was there. I also got to see his collection of Horses. Quite an impressive group I must say. Mike, as always, it was a pleasure visiting with you. Hope we can do it again soon. Jim Share this post Link to post Share on other sites
sorekiwi 761 #9 Posted May 14, 2011 It was a pleasure Jim! And anytime after 12 we could've had some cold ones! Share this post Link to post Share on other sites