catman81056 3 #1 Posted May 26, 2008 Where can you access these bulletins? Or can you!!! Looking for a spindle for my 48" deck mod# 5-1220 and I keep getting refered to service bulletin# 211. Share this post Link to post Share on other sites
CasualObserver 3,408 #2 Posted May 27, 2008 Hey Tim... Well.. it's a long and painful process.... or you just have to know somebody! Here you go. Attached File ( Number of downloads: 255 ) sb211.pdf Share this post Link to post Share on other sites
catman81056 3 #3 Posted May 27, 2008 Hey Jason, you da man Thanks a bunch :WRS: Share this post Link to post Share on other sites
WheelHorse_of_course 99 #4 Posted May 28, 2008 I rebuilt one of these years ago using generic components I got from Small Parts and/or Stock Drive Components (I had no manual and no sticker with the deck number) I am fairly certain this diagram does not show the parts in the order of assembly. IIRC the snap ring shaft and thrust washer go on top of the ball bearing. It has been a long while, but between this diagram and my memory I don't see any other way this could work and not have the shaft drop out the bottom.! Good luck Share this post Link to post Share on other sites
CasualObserver 3,408 #5 Posted May 28, 2008 You're welcome Tim... Hope it helped. :whistle: Share this post Link to post Share on other sites
