cletus 0 #1 Posted May 5, 2011 hi folks-just picked up a jacobsen chief 1000. how can i adjust the power drive?cant seem to get it right-too much friction stalls the engine,not enough and the belt slips. their must be a winning formula :wh: Share this post Link to post Share on other sites
perry 82 #2 Posted May 5, 2011 i dont know anything about the jacobsen's. but if its a hydro and it is stalling the engine then it may be internal . Share this post Link to post Share on other sites
perry 82 #3 Posted May 6, 2011 you may want to try here - http://www.mytractorforum.com/forumdisplay.php?f=204 Share this post Link to post Share on other sites
rustbucket 4 #4 Posted May 8, 2011 i belive he might be meaning the PTO on the side of the engine that drives the deck. i have no idea and i use to own a chief 1000. Share this post Link to post Share on other sites
cletus 0 #5 Posted May 10, 2011 i belive he might be meaning the PTO on the side of the engine that drives the deck. i have no idea and i use to own a chief 1000. thats exactly what i mean! :hide: Share this post Link to post Share on other sites
daemon2525 5 #6 Posted May 10, 2011 Sounds like the deck is too hard to turn. Do the blades turn freely ? Share this post Link to post Share on other sites
