rustbucket 4 #1 Posted April 25, 2011 My dad is in need o f a location or someone who is makeing pulling hitches and wheely bars for wheel horses. already checked ebay as well as google the only guy on google is the one who tried stiffing me last time i went looking. any help would be greatly apreciated. :thumbs: Share this post Link to post Share on other sites
TT-(Moderator) 1,131 #2 Posted April 25, 2011 Draw up some plans and go visit your local welding/fabrication shop. I make my own (with only a Sawzall and/or torch, hand drill, and a Miller 140 wire welder) so I can build them to suit me. Share this post Link to post Share on other sites
jhunsch 20 #3 Posted April 26, 2011 It's crude but works. Made it my self. Share this post Link to post Share on other sites
Deere Hunter 54 #4 Posted April 26, 2011 jhunsch, I like the concept, but one thing concerns me. The wheelie bar wheels are to close to the tractor. On a soft track there is no way they will keep the tractor from rolling over. Wouldnt want to see anyone get hurt in a sport that is suppose to be for fun. Rustbucket, If you have a buddy with a welder you can build a hitch real easy. Just need some angle iron and all thread. Here is a pic of one of my setups. I have better pics somewhere, will post when I find them. Share this post Link to post Share on other sites
TT-(Moderator) 1,131 #5 Posted April 26, 2011 One of my earlier attempts: Here's one I whipped up in about half an hour, and it actually worked amazingly well. Share this post Link to post Share on other sites
rustbucket 4 #6 Posted April 27, 2011 thanks for the pictures and ideas. i will try and give one of them a shot. my landscape boss has a wire welder but im not to trusty of his welds even though my allis chalmers hitch is still intact due to my over engineering. Share this post Link to post Share on other sites
jhunsch 20 #7 Posted April 29, 2011 Hey Rustbucket I would like to see a picture of your Allis Chalmers hitch. I have Two Allis Chalmers as well B110 & B112. Thanks Jeff (jhunsch) Share this post Link to post Share on other sites
rustbucket 4 #8 Posted April 30, 2011 i will see if i can scrounge something up. picture wise. i will say one thing though my allis hitch is not pretty at all. Share this post Link to post Share on other sites
rustbucket 4 #9 Posted April 30, 2011 heres a few pictures of the hitch i have on the rear of my allis. i have it so it bolts right on and off where the top hitch piece for the allis would sit and bolted down below where the 3 point implaments would bolt up. the two long arms comeing back are the wheely bars. sort of an all in one piece. Share this post Link to post Share on other sites
