B-8074 19 #1 Posted April 21, 2011 How much end play is to much? Share this post Link to post Share on other sites
rmaynard 15,605 #2 Posted April 21, 2011 My 8-Speeds all have about 1/8". Share this post Link to post Share on other sites
B-8074 19 #3 Posted April 21, 2011 I don't know if it matters, but it's an Eaton 11 hydro on my C-175. I'll have to check it again. I think it's more than an 1/8". Atleast there is no up and down movement. Share this post Link to post Share on other sites
rmaynard 15,605 #4 Posted April 21, 2011 I don't know if it matters, but it's an Eaton 11 hydro on my C-175. I'll have to check it again. I think it's more than an 1/8". Atleast there is no up and down movement. Sorry. I don't know anything about the Eaton's. My info is based on the Wheel Horse Uni-Drives. Share this post Link to post Share on other sites
stevasaurus 22,863 #5 Posted April 21, 2011 I would like to ask ...why are you asking??? do you have a problem, a noise, just curious. You are going to have a little play, and Bob is right...could be 1/8 - 1/4" easy...up and down should be minimal...no matter what transmission you have. :wh: Share this post Link to post Share on other sites
B-8074 19 #6 Posted April 21, 2011 Well I put her up on jack stands today because I'm fabbing up a sub-frame for a Johnson loader. I'll start a thread on that tomorrow. Anyhow, when I took the wheels off I noticed the end play and It seemed to be more than it should. There are no leaks and no up and down movement at all . Just thought I would ask about it while I had it up on the stands. Share this post Link to post Share on other sites
