8 speed no 1st or reverse

[Randy72 0]

!988 wheel horse 414 I have no 1st or reverse. 2nd and 3rd work good 1st and reverse don't seem to engage. Anyone have suggestions as to what the problem is?

Thanks

Randy

[Irv 115]

Sounds like your screw holding the shifter in place is either loose or broken. Same thing recently happened to me. It is a dogpoint allenhead screw with a locknut on it. Look thru past posts in the transmission section here and you will get all the info you need to fix it. here's mine. http://www.wheelhorseforum.com/index.php?showtopic=23729

[smoreau 658]

:thumbs: and the previous post from Irv sound like your problem.

[Randy72 0]

Irv thanks for your information. The set screw to hold the shifter in place was not the problem. When I checked the posts you suggested there was mention of a roll pin in the shifter fork. that was the problem it is now fixed and readyy to put the tractor back together.

Thanks again

Randy :D

[Irv 115]

:thumbs: Glad you got it fixed Randy!

[Duff 206]

Once again, the Red Square team pulls together!

Duff :wh: