Bama Jama 0 #1 Posted March 22, 2011 Hi Wheelhorsemen! I'm Bill from Montgomery,Al and just picked up a Work Horse 700 Sat. It is very needy. It sat out doors for years and I traded a guy some Harley parts after he rescued it and put it in a barn. The transaxle has water in it and won't shift and the & 7 horse is dead. I already have the tractor apart and have a lead on a Kohler 12 horse. Look forward to sucking up info on these little tractors and hope I can shre some as well. Bill Share this post Link to post Share on other sites
Indy w h 5 #3 Posted March 22, 2011 Welcome to the sickness Bill !!! Indy Share this post Link to post Share on other sites
smoreau 658 #4 Posted March 22, 2011 :thumbs: :thumbs: Share this post Link to post Share on other sites
Kelly 1,029 #5 Posted March 22, 2011 :thumbs: And a 12hp kohler will not be a bolt in, if it is a 301A you will have to cut the hood up and I think you will have to modify the belt guard alot, if it's a 301AS depending on what it is out of, you might need to swap the oil pan, and minor mods to the belt guard, wiring and cables will have to be changed. a 8hp Kohler will fit better with fewer changes. Share this post Link to post Share on other sites
MikesRJ 552 #7 Posted March 22, 2011 :thumbs: Welcome Bill, I'm sure with your Harley experience you'll have here up, running, and looking good in no time. Lots of information and help around. Just ask. Share this post Link to post Share on other sites
dclarke 4,032 #8 Posted March 22, 2011 :thumbs: Bill, nice looking . you've come to the right place, good luck with your project. Share this post Link to post Share on other sites
VinsRJ 721 #9 Posted March 22, 2011 :thumbs: Nice to have you join! Share this post Link to post Share on other sites
JC 1965 1,530 #11 Posted March 22, 2011 :thumbs: Hi Bill and I'm sure you'll like it here. :thumbs: Share this post Link to post Share on other sites
Bama Jama 0 #12 Posted March 22, 2011 Thanks guys. Kelly,after more reserch on the 301, which is an electric start, I found that the oil pan may need changing. It is on a Cub 126 and I think they may have a deep pan.. I don't mind modifying but I'd rather not cut any body panels. I have an M18qs that I'd love to put on it but that sucker is huge in comparison to the wh. I'm going through all the threads trying to absorb as much as I can and thanks for any advice. Share this post Link to post Share on other sites
fabricator2009 48 #13 Posted March 22, 2011 :thumbs: Share this post Link to post Share on other sites
Duff 206 #15 Posted March 23, 2011 :thumbs: Glad to have you aboard! Duff :thumbs: Share this post Link to post Share on other sites
Sparky-(Admin) 21,315 #16 Posted March 23, 2011 :thumbs: Mike........ Share this post Link to post Share on other sites
WH854 44 #17 Posted March 27, 2011 Howdy Bill Good luck with your Tractor. Chas Share this post Link to post Share on other sites
Bama Jama 0 #19 Posted March 28, 2011 Thanks! :thumbs: Share this post Link to post Share on other sites
varosd 1,185 #20 Posted April 4, 2011 :thumbs: You should be cutting some grass by now, when we lived in NC..it seemed that our Bermudagrass had to be cut (almost) year round!! Welcome aboard! Don V Share this post Link to post Share on other sites
dpm2000bolt 0 #23 Posted April 17, 2011 :thumbs: I am sure you will find something to get her up and running again. Share this post Link to post Share on other sites
keg 0 #24 Posted April 18, 2011 hi glad to finally see a neighbor here lol. those wh are a rare sight down here not many of us southerners have heard of them lol welcome and as evry one has said u will b amazed at the knowledge of these guys i have done so much thanks to them :thumbs: Share this post Link to post Share on other sites
SAM58 30 #25 Posted May 18, 2011 Cool, That little baby is Very restoreable Surface rust just preps the sheet metal for new red paint Hello and :) Share this post Link to post Share on other sites
