mr.pipes 4 #1 Posted March 17, 2011 What model tractors will CUP HOLDER KIT 105-1400 fit? I know it came on the 315 classic. Are the fenders all the same on the 300,400,500 Tractors? Somebody told me I looked like a dork last time I wore my dual-can helmet. Share this post Link to post Share on other sites
MikesRJ 552 #2 Posted March 17, 2011 With or without the .... never mind I digress. The cup holder was made for the 260 Yard and Garden Tractor and the 300 series only. Don't know if the fenders are the same for the 3, 4, and 500's though. Perhaps it could work if they are. Share this post Link to post Share on other sites
Kelly 1,029 #3 Posted March 17, 2011 I would guess it will fit 300, 400 and 500 where it mounts the fenders are the same shape. Share this post Link to post Share on other sites
mavfreak 11 #4 Posted March 17, 2011 I would think that wearing the helmut would suck. Every bump you hit then beer goes all over you! Share this post Link to post Share on other sites
MalMac 1,331 #5 Posted March 17, 2011 I put one on a 314 works great for water bottles with a cap other than that don't put anything that open in there. This might only affect me but I have trouble of catching my leg on it when I swing my leg over getting on and off the tractor. Share this post Link to post Share on other sites
bk-scouter 93 #6 Posted March 17, 2011 One came on my '99 314-8. -BK Share this post Link to post Share on other sites
wheelhorsec85 5 #7 Posted March 17, 2011 cup holder ??? !!! ha ha ha ha ha . buy a john deere no only kidding . yes they came with cup holders but are fairly rare . and only in the classic series :thumbs: Share this post Link to post Share on other sites
can whlvr 993 #8 Posted March 19, 2011 do ya have to drill the fender? Share this post Link to post Share on other sites
C-Series14 15 #9 Posted March 19, 2011 Yes...comes with a template and screws go thru the bottom of the fender into the cup holder. I got one several years ago and never put it on yet...Only works on the rounded fenders, 1980 and up. Share this post Link to post Share on other sites
Jim_M 178 #10 Posted March 19, 2011 I glue them on with clear silicone, works great, never had one come loose and you don't have to drill holes in your fender. Share this post Link to post Share on other sites
