eibbed 63 #1 Posted February 26, 2011 Hi guys, I just purchased a 1974 C120 automatic. I still have to go get it, but it won't roll. Isn't there some bolt or screw I can turn to enable the tractor to roll freely? Thanks in advance, Dave Share this post Link to post Share on other sites
Sparky-(Admin) 21,405 #2 Posted February 26, 2011 Yep, flip up the rear fender and you will see a small "T" handle which is the freewheeling valve. Open that and you should be all set. Mike........... Share this post Link to post Share on other sites
eibbed 63 #3 Posted February 26, 2011 Thanks Mike! Dave Share this post Link to post Share on other sites
can whlvr 993 #4 Posted February 27, 2011 on my automatics its just a large slot bolt on the left side of the tranny,mine were not easy to get loose so i made a platform with 4 wheels that i sit the rear tires on to move them if they dont run Share this post Link to post Share on other sites