DECAL HELP

[kpthorsefan 34]

Hi all, I have nearly finished my snow plow for my C-141, its a 42" and has no id tag on it. what i would like to know is what decals where on it ? Some pics would be a great help to see if i can get them made. Many thanks kevin..

[meadowfield 2,616]

from the UK ones I've seen it's usually a red with white writing WHEEL HORSE. Same as the rear fenders on mid 70's raiders and C series - 307x30mm is the usual size.

mark

[kpthorsefan 34]

from the UK ones I've seen it's usually a red with white writing WHEEL HORSE. Same as the rear fenders on mid 70's raiders and C series - 307x30mm is the usual size.

mark

Thanks for that mark. I also think there was a caution decal on there as well, when i took it all apart the decals were to far gone to read properly :banghead:

[Anglo Traction 761]

Hi Kevin, You could try looking in the Implements Picture Gallery for some examples and perhaps contact the Member to obtain an image of the Caution Label. Mark is correct with the W/H Decal Style for your age of Blade/Frame. It is applied top left of the back of the Blade. Caution Label on the Right from what I can see.

[TT-(Moderator) 1,145]

Since you aren't sure what year your dozer blade actually is, (they're pretty much the same) I would match it to the generation of your tractor. (the same as the original rear fender decal on the C-141)

Some of the original "Caution" decals were quite large - and a bit ugly.

P/N 113915 appears to still be available from Toro. ($6.00 here in USA)

Hard to see well in this photo:

....but can be read here:

[squonk 41,631]

Here's some pics of the decals on my plow. It's off of a Raider 12 and now on my C-160. Most of the WH decal flew off when I hit a sidewalk at speed!

[kpthorsefan 34]

Hi Kevin, You could try looking in the Implements Picture Gallery for some examples and perhaps contact the Member to obtain an image of the Caution Label. Mark is correct with the W/H Decal Style for your age of Blade/Frame. It is applied top left of the back of the Blade. Caution Label on the Right from what I can see.

Hi richard, I have had a look through picture gallery and cant seem to find any, but many thanks..

[meadowfield 2,616]

If I can get the decal dimensions for the caution, then it's no trouble for me to reproduce if you are looking to renovate...

mark

[kpthorsefan 34]

....but can be read here:

[kpthorsefan 34]

[TT-(Moderator) 1,145]

Hi Terry, The warning decal looks spot on . would you happen to know the size and colour of it ?

I no longer have that dozer blade and my newer one (1995) doesn't have the warning decal.

I would guess it to be something like 2" high X 5" long and the base color is white with red print.

The decal on Mike's ("squonk") blade should be the same as the early C series rear fender decal.

1.125" high X 12.125" long should be the dimensions.

[kpthorsefan 34]

If I can get the decal dimensions for the caution, then it's no trouble for me to reproduce if you are looking to renovate...

mark

Pm sent..

[kpthorsefan 34]

Hi Terry, The warning decal looks spot on . would you happen to know the size and colour of it ?

I no longer have that dozer blade and my newer one (1995) doesn't have the warning decal.

I would guess it to be something like 2" high X 5" long and the base color is white with red print.

The decal on Mike's ("squonk") blade should be the same as the early C series rear fender decal.

1.125" high X 12.125" long should be the dimensions.

Many thanks for that terry :banghead: