belt width and length c-145 hydro

[Gregg in ohio 0]

can someone give me the correct width and length for a hydro C-145 drive belt..sheeesh the old one was way to long or streched and the tensioner pulley was froze up..this was supposed to be a fixer upper but its going to be a resurection ..they ran her till she quit moving and parked it outside..at least i got a front blade and a nice stored inside 48in deck and a TRAC-VAC thing to suck up leaves for it also ..had the 145 running and moving so far so good ..it just might have a pourpose here mowing the lawn someday gregg

[WH854 44]

:thumbs: Drive belt P/N 7473 You can go here and check it out.

http://www.rcpw.com/search/?quest=7473&sea...=46&search.y=24

You can go Here and get a parts break down of tractor just put this Model# in like this 01-14KE02

https://lookup3.toro.com/partdex/index.cfm?xCaller=Toro

You can also go here and put the above Model# in an get more information.

https://homeownersolutions.toro.com/portal/...ductDetailsPage

Hope this helps

Chas :ROTF:

[Gregg in ohio 0]

thank yuo gregg in ohio