What do you think

[Trouty56 567]

Saw this on the eBay. Looks very close to like a D-Series cylinder. Here is the description....

This NEW cylinder is 8 inches compressed and strokes out to 12 inches center of hole to center with a 1 inch shaft

JOHN DEERE

These are NEW and tested. This welded hydraulic cylinder. Part number #AM31362. This part is for the 54 and 56 front blade, lift and angle. The 43c and 54c front blades. The 26, 246, 51, 60 inch rotary broom. The 3-point hitch. The 140-300-312-314-316-317 hydostatic.