bigbobbyb 0 #1 Posted December 13, 2010 Hello, One of my neighbors has this Bolens front mount sickle bar for sale. It appears to be in excellent condition and the blades move back and forth easily when the pully is turned. It's got a 44" bar. Anyone know anything about these? Do you think it could be retrofitted for a WH C-100? .....the price is right... Thanks! Attached Image Share this post Link to post Share on other sites
Kelly 1,029 #2 Posted December 13, 2010 That is for a walk behind tractor, I guess you could fab it up to work, the pulley is on the correct side. Share this post Link to post Share on other sites
defed 0 #3 Posted December 14, 2010 it can be done. i had one from a 'merry tiller' that i made fit my 653. it worked fairly well except it was pretty heavy in the raised position. lowered, it rode on its skids. sickles, in my experience, don't work that well in fine grass. courser material (weeds, goldenrod, small dogwoods etc) cut much better w/o clogging. Share this post Link to post Share on other sites
bigbobbyb 0 #4 Posted December 14, 2010 Thanks for the feedback. Note that the sticker on the side of the mower says "Bolens UNISICKLE". Share this post Link to post Share on other sites
bigbobbyb 0 #5 Posted December 14, 2010 Related ad from 1948 Popular Mechanics: Attached Image Share this post Link to post Share on other sites
dennis crutchfield 0 #6 Posted April 28, 2018 i would be interested in that 44 inch sickle, have you sold it yet? Share this post Link to post Share on other sites
Digger 66 3,478 #7 Posted April 28, 2018 1 hour ago, dennis crutchfield said: i would be interested in that 44 inch sickle, have you sold it yet? Welcome aboard Dennis , but this thread's over 8 years old . Share this post Link to post Share on other sites
953 nut 55,081 #8 Posted April 28, 2018 3 hours ago, dennis crutchfield said: i would be interested in that 44 inch sickle, have you sold it yet? Dennis, you can post a wanted ad in our classified section. http://www.wheelhorseforum.com/classifieds/wanted/?do=form&d=2 Share this post Link to post Share on other sites
