Starting on a wheel horse 4x4

[dave24 18]

building a 4x4 should be @ charlote wheel horse show! kelly u and the others will see it going to be awesome! u guy,s wont be disappointed! I love round hood & fenders!!!

[wheel horse man 56]

That will be one sick tractor!!!! keep the up dates comming i will

[littleredrider 409]

I've always wanted to do this too, since I build 4wd trucks, why not a tractor?? I can never come up with a simple way for a front axle and how to get power to it, and have it match or even come close the rear ratio.

What kind of Noma tractor did that come out of?? A rear steer??

[dave24 18]

i really dont know... i got from a guy who was going to make a 4x4 but didnt have the time, all i know is that it was off a noma front wheel drive tractor :ychain:

[sorekiwi 761]

If that is in fact a 754, you might want to find another tractor to do it to.

There isnt too many of those around, you shouldnt have too much trouble selling that one and buying something else to base your custom on.

[Kelly 1,030]

If that is a 754 I have a few tractors you can take your pick from for a swap, and I'm not that far from you, about a hour drive.

[Rollerman 290]

i really dont know... i got from a guy who was going to make a 4x4 but didnt have the time, all i know is that it was off a noma front wheel drive tractor

It's actually a Noma LT rideing mower trans with four wheel steering.

The back wheels on the rider would turn oposit of the fronts for a tighter turning radious......pre Z turn tech?

A member here "Bob Rock" made a latter style Toro GT front assist useing one of these to drive the front wheels.

Good luck with your project.

I think an early round hood would look neat set up with front assist.

But like a lot of Wheel Horse enthusiasts, I'd hate to see an early round hood cut up.

[TT-(Moderator) 1,145]

Calm down, guys..... it's not even a '64.

I'm pretty sure it's a 753 - especially since that's what it says in Dave's signature.

That frame style -with the welded battery "box" - and lower steering shaft front casting (where tie rods attach) are definitely '63 parts, but I can't tell what tranz that is. It almost looks like a newer "little" 8 speed with the hi-lo shift shaft cut off.

I'm right there with you on saving the round hoods, Stephen. :D

[buckrancher 2,694]

but I can't tell what tranz that is. It almost looks like a newer "little" 8 speed with the hi-lo shift shaft cut off.

I'm right there with you on saving the round hoods, Stephen.

I thought that too looking at the picture

[jusjeepn 59]

I don't even see an axle, just a round hood on jack stands and an 8 speed rearend :ychain:

[sorekiwi 761]

I don't even see an axle, just a round hood on jack stands and an 8 speed rearend

It was there Pat, but now its gone. :D

[d180man 5]

Hi good luck with it ! we have 2 case tranz that we wount to make a 4x4 but just have not had time keep up the photos !! :D

[dave24 18]

its a 753 model, decided to call it a "754" because it sounts better with the "4x4". :ychain:

[massey 118]

Sounds like a cool project.

[jasoncracer 0]

cant wait to see it keep us updated with pictures!

[JUSS10 250]

i was over there the other day and saw it. it will be a sweet little machine when its done. the front axle is really cool. can't wait to see how it turns out :ychain:

[wheel horse man 56]

what happen to the project

love to see some updates!!!!!!!!!!!!! :ychain:

[wheel horse man 56]

are you working on it i cant wait