Raider 10 4 speed transaxle

[WH Raider10 17]

Hi everybody,

The other day I drained and flushed the oil out of my transaxle. It's a 4 speed and now I'm wondering how much litres of oil goes in it.

Any comment would be verry helpfull!

Pieter-Jan :thumbs:

[rmaynard 15,598]

I believe your transmission takes the equivalent of 2 Qts. US. However, you don't want to overfill it. Does it have a dipstick? If so, start with 1-1/2 Qts. US and check the level. Top it off slowly until it hits the full mark.

Bob

[WH854 44]

In USA it would take 3 Pints or Quart and 1/2 on my 4 speed there is no dip stick. I filled it through the shift lever hole.

Chas

[rmaynard 15,598]

Thanks for correcting me on that. :thumbs:

[WH Raider10 17]

Hi,my transaxle has no dipstick. There is a little filler plug on the left side in the back. How many litres is 3 pints?

[WH854 44]

I think it would be 1.419 litres

Chas

[Forest Road 594]

First off did you drain the fluid from the plug under the the axle? If yours has the plug hanging off the rear w/ a short extension your set. Remove the plug. Fill it till the fluid is @ the top of that little extension pipe. And you should be done. 1 1/2 to 2 quarts Gear lube .

[WH Raider10 17]

Yes,I drained mine at the plug under the transaxle. Thanks for the help! :thumbs: