mattd860 162 #1 Posted November 27, 2010 I bought 2 quarts of 80w-90 for the 8-speed tranny on my 418-8. If poured both of the quart containers into the tranny and then realized that one can was 85w-140. Someone at the store must of put the 85w-140 can behind the 80w-90 and I didn't notice until after it's too late. So now I have one quart of 80w-90 and one quart of 85w-140 in my tranny. Is this bad or can I run with it? Share this post Link to post Share on other sites
mavfreak 11 #2 Posted November 27, 2010 That really isn't going to hurt anything at all. Share this post Link to post Share on other sites
dgoyette 12 #3 Posted November 27, 2010 I would leave it - no big deal. The uni drive -8 has manuals recommending both 90 and 140 gear oil. No real explanation why one manual recommends 90 and another manual will recommend 140. Share this post Link to post Share on other sites
mattd860 162 #4 Posted November 27, 2010 ok thanks guys Share this post Link to post Share on other sites
Save Old Iron 1,566 #5 Posted November 27, 2010 as long as they are both from the same manufacturer - go with it Share this post Link to post Share on other sites
