Tee 0 #1 Posted November 21, 2010 Could somebody please post a pic on here of how the original seat should look and sit a on a 1976 b80. this one i have seat mounted stationery on blocks of wood and its so far forwards i sit on the steering wheel. lol, this aint natural. thanks Share this post Link to post Share on other sites
dclarke 4,045 #2 Posted November 21, 2010 look in the wheel horse picture gallery on this forum, if that doesn't help someone will jump in and help. :thumbs: Share this post Link to post Share on other sites
littleredrider 409 #3 Posted November 21, 2010 Look in the gallery, should be some in there. Share this post Link to post Share on other sites
mavfreak 11 #4 Posted November 21, 2010 I have a 72 commando 800 which basically is the b80. I added the seat springs. here is one picture with springs one without. its an aftermarket seat also there should be a set of holes under seat in fender pan. Just remove seat and set to were your comfortable Share this post Link to post Share on other sites
TT-(Moderator) 1,145 #5 Posted November 21, 2010 A 1976/7 B-80 (8 speed) would have the solid-mounted fender with the flip-up seat mount. There are U shaped springs bolted between the top of the mount and the seat pan. The original seat was a low back version with the embossed molded cover. The 1974/5 B-80 (4 speed) models had a flip-up fender and the seat springs bolted directly between the fender and the seat pan. Share this post Link to post Share on other sites
Tee 0 #6 Posted November 21, 2010 Could somebody please post a pic on here of how the original seat should look and sit a on a 1976 b80. this one i have seat mounted stationery on blocks of wood and its so far forwards i sit on the steering wheel. lol, this aint natural. thanks thanks fellers now i know "this seat is wrong" on mine. :thumbs: Share this post Link to post Share on other sites
