Drive belt numbers

[pumper.atv 26]

Does anyone know if i can use a drive belt off of a electro 12 to test a tranny on an 875 that is missing a belt? They are both hydros

What are the part Numbers

:USA:

[TT-(Moderator) 1,145]

The short answer is "no".

Use this link to get you to the Toro website where you can look up almost anything you want to know:

https://lookup3.toro.com/partdex/index.cfm?...es&xCaller=Toro

[Anglo Traction 761]

Hi, I have no experience of these models, but my records show the following -

875 uses Drive Belt Part #8005 . section type 4L . Overall length 72".

Electro 12 uses Drive Belt Part #8334 . section type B . Overall length 84.80".

I would assume they are not compatible, but perhaps someone else familiar with these may or may not endorse this.

Regards

[pumper.atv 26]

:)

:USA: