REPRODUCTION DECALS

[Vinylguy 4,674]

Thank You All For Your Continued Support.

After 4 Years And Countless Hours Of Design Time I

Have Recreated Many Of The Most Common

Vintage Wheel Horse Decals Needed To Restore

These Great American Tractors. If You Do Not

Find Your Decals On My Website Please Contact Me

Or Leave A Post With Your Request. I Will try To Get

Them Developed When Time Allows.

I Am Now Using A High Quality Digital Print Vinyl

With Air Escape Technology That Is Much More User Friendly.

It Is A Bit More Expensive But Better Quality And Easier To Install

With Less Chance For Bubbles Or Wrinkles.

You Can Still Use The Windex Wet Application Technique That Is

Popular With Many Of Our Members.

All Decals Are Made Up As Orders Come In To Assure

You Have Brand New Fresh Decals With A Long Shelf Life.

If You Find An OEM Decal In Most Cases They Have Been On A Shelf For

Many Years And The Adhesive Has Most Likely Eaten Into The Liner

Making It Difficult If Not Impossible To Use.

We Are Making Every Effort To Improve Customer Service And

Delivery Time Though Most Of You Know I Run A Full Time Graphics Shop

And It Has To Come First.

With That Said I Can Tell You That Most Orders Usually Arrive At Your Address In About 7 To 10 Days. Some Times It Can Take Longer.

Thanks Again

[rockinhorse 45]

Terry I have a w/h tractor i need decals for. It is not the normal w/h here are a few pics. Just need hood decals maybe you have something already made up. Not much room on back for anything to big. Let me know if you have any ideas.

thanks Karl stohry phone # 1-765-525-7105 e-mail ksstohry@tds.net

[wheelhorse-c-161-1979 117]

Hi,

Do you have a price list?

I'm looking to re decal my 1973 D180

Thanks

Jack

[rmaynard 15,514]

Try www.redoyourhorse.com

[David Lee 0]

Looking for new stickers for my 953

[70wheelhorseGT-14 2]

I'm looking for a "caution" sticker that is on the seat bracket of a 1970 GT-14. I could not find one on your site and that is the only sticker I need. It is in this picture, but I only need the caution sticker.   http://restorationdecals.co.uk/gt14.htm

[Vinylguy 4,674]

I'm looking for a "caution" sticker that is on the seat bracket of a 1970 GT-14. I could not find one on your site and that is the only sticker I need. It is in this picture, but I only need the caution sticker.   http://restorationdecals.co.uk/gt14.htm

Here is a link to the push valve caution decal you are looking for.

http://www.redoyourhorse.com/push-valve-decals/

[AMC RULES 37,130]

Ready to do the Ark loader decals Terry? 

[bill moore 3]

...Hello Vinylguy... 

 

     I have just about completed restoration on my '64.5 1045 Wheelhorse and am in need of all decals. Please let me know if decals are available and etc...

 

 

                                     Bill Moore

[Fun Engineer 859]

Bill Moore

Go to the vendor section where Terry has a link to his store for a listing of his decals. Hope this helps.

Sent from my tractor seat using Tapatalk 2

[Vinylguy 4,674]

Here is a link Bill

Also use the search box at the top of the website to search for other decals you may need.

Make sure to register before you purchase so I can add your account to the support group

which will give you the discount.

 

http://www.redoyourhorse.com/856-1045-1046-1055-1056-decal-kit/

Edited June 2, 2014 by VINYLGUY

[edwroy 138]

Do you have decals made for the Ark Loader?  The 550 and the Caution label for the loader.

 

Thanks

 

Edwroy

[foxy 0]

Thank You All For Your Continued Support.

After 4 Years And Countless Hours Of Design Time I

Have Recreated Many Of The Most Common

Vintage Wheel Horse Decals Needed To Restore

These Great American Tractors. If You Do Not

Find Your Decals On My Website Please Contact Me

Or Leave A Post With Your Request. I Will try To Get

Them Developed When Time Allows.

 

I Am Now Using A High Quality Digital Print Vinyl

With Air Escape Technology That Is Much More User Friendly.

It Is A Bit More Expensive But Better Quality And Easier To Install

With Less Chance For Bubbles Or Wrinkles.

 

You Can Still Use The Windex Wet Application Technique That Is

Popular With Many Of Our Members.

 

All Decals Are Made Up As Orders Come In To Assure

You Have Brand New Fresh Decals With A Long Shelf Life.

If You Find An OEM Decal In Most Cases They Have Been On A Shelf For

Many Years And The Adhesive Has Most Likely Eaten Into The Liner

Making It Difficult If Not Impossible To Use.

 

We Are Making Every Effort To Improve Customer Service And

Delivery Time Though Most Of You Know I Run A Full Time Graphics Shop

And It Has To Come First.

 

With That Said I Can Tell You That Most Orders Usually Arrive At Your Address In About 7 To 10 Days. Some Times It Can Take Longer.

 

Thanks Again

hi do you do a full set of decals for a raider 10 1975 if so what is the price regards bob fox

[rmaynard 15,514]

I don't think that Raider 10 was made after 1972, but if it is a 1970, 71, or 72, take a look here.

http://www.redoyourhorse.com/1970-71-72-raider-sets/

Oh, and

[Vinylguy 4,674]

Thanks Bob

 

 

hi do you do a full set of decals for a raider 10 1975 if so what is the price regards bob fox

Do you have the model number?
 

[Hammerhead 817]

Hello Terry, I would like to know if you can make the WHEEL HORSE letters on the front of the round hood tractors? They are about 1/8th of an inch wide by about 1 1/4 tall, just a guess but you probably have access to a round hood for reference. Also the KOHLER letters on 7 and 8 hp Kohler engines. Both of these requests are for the raised letters on both parts. Thanks let me know what ya think about making these up. I am sure others would buy them as well. It is some what hard to hand paint these letters. Thank you! Just ordered 2 1955 hood decals and 2 steering wheel insert decals. Keith

[Vinylguy 4,674]

Keith 

 I do not have access to a hood with the extruded letters. Also it is difficult position  vinyl decals on extruded letters and have them look right. Have you tried using a paint stick.

 

[Jason P 7]

I need decals for the 5-1220 48" side discharge deck and decals for 1997 wheel horse 314 hydro and the decal for the 48" snow blade. Prices on all. Ones I need first is for the deck.

[rmaynard 15,514]

Did you do a search on Terry's web site for what you need? Many times a search will produce items that are not yet categorized.

[857 horse 2,581]

Terry...a question....everyone will hate me.....But.....i am planning on getting an 867,,,,,i have seen the decals....Hateum !!!!!

BUT !!!!!!    i like the 857 decals.........can you make me a set and change the 857  to 867..?? ??????????

 

I know......Shoot me...    But....thats what i like.......this will be my winter project

 

Thanks Terry........

 

                    Howard 857 Horse...........You locally owned and operated Mash Pole Guy....

Edited August 26, 2016 by 857 horse

[953 nut 55,321]

26 minutes ago, 857 horse said:

.i am planning getting an 867,

[857 horse 2,581]

Richard.....one of those Bananas is You...lololool   One is Road Apples...and behind door #3 is Elcamino.....

 

It will be a 400 mile 1 way road trip......up state New York......Road Apples will be my side Kick///////1 day affair !!!!!!

  There will be loading pics......road pics....lunch pics........dropping Road Apples off Pics.....

 

Oh yeah,,,,,,Gonna do a play by play.....

Edited August 25, 2016 by 857 horse
and dont forget your mash pole sign !!!!

[AMC RULES 37,130]

   Can anyone translate...

what Howard just said? 

[19richie66 17,508]

I don't care what decals you put on it Howard. Just make it like you want it.  

Edited August 26, 2016 by 19richie66

[857 horse 2,581]

Richie,,,,thanks for the thoughts !!!!!   I was just talking about a road trip....taking (Jay) Road Apples along and

 

Craig just caught me on a rant.!!!!! I've been know to do that......lolollool

 

I want to document this heist like Craig does...." In my rear view"   Husssstlin one out of State back to the U.S of VA lolololol

 

and i knw if i dont do pics,,,,,Im busted and caught in the act.,,,So.....4 weeks from now......an 867 will be tied up in the back of the old truck.....

Edited August 26, 2016 by 857 horse