Drive Pully Size

[WH854 44]

What size is the drive pully on a c-175 I think the P/N is 7443 (5" maybe) Could it be used on a C-165 AUTO?

Chas :USA:

[TT-(Moderator) 1,145]

Gear drives are 4" and automatics are 5 1/4".

As long as the 175 is an automatic, it will work on the 165.

[WH854 44]

:USA: TT You Da Man

Chas :wh:

[roger 0]

What is the drive pulley size on a 212-6 wheelhorse tractor rear end.

[SousaKerry 502]

about 8 inches IIRC

[roger 0]

No help .I have a 212-6 wheelhorse tractor . Need to know what size the pully is on the rear end. Thanks

[TT-(Moderator) 1,145]

:WRS:

Sorry - I'm a bit confused.

I take it that there's no pulley on your tractor now?

[roger 0]

It had no pully when i bought the tractor,That is why I don't know what sIze it is .Thanks

[SousaKerry 502]

212-6 should have a tecumseh-peerless tranny the pulley's are about 8" in diameter I have a couple of them laying around in storage somewhere

[roger 0]

Thanks,I just found out It Is 8 7/8 or 9 inches. It is the same as a 212-5