Pirate 0 #1 Posted September 2, 2010 Just wondering what type of setup different owners are using for a hayraulic pump, on non hydraulic tractors? Electric snow plow pump? PTO driven pump? If so what pump? Thanks for any info. Share this post Link to post Share on other sites
Forest Road 594 #2 Posted September 2, 2010 WH used an electric actuator on some models to raise and lower implements. Some of the guys here have bought after market models and adapted them. Good luck. Share this post Link to post Share on other sites
wallfish 16,780 #3 Posted September 2, 2010 You can get small hydraulic pumps from Northern Tool. I used a pto driven pump for a back hoe. The factory made loaders use the same style. What are you going to use the hydraulics for? Link to the Pump I used Share this post Link to post Share on other sites
Indy w h 5 #4 Posted September 2, 2010 If your wanting a hydro pump for a round hood you can get a HY-2 that bolts on Indy Share this post Link to post Share on other sites
Pirate 0 #5 Posted September 5, 2010 I picked up a snow plow for my 414-8 and was thinking of making a small bucket for it, and would need a way to lift it. Also maybe a rear implement lift. A small linear actuator might be the way to go. Any good source for actuators? Share this post Link to post Share on other sites