dgjks6 6 #1 Posted July 21, 2010 So I have been bored at work and playing on photobucket. I edited some pictures and have decided to post how to rebuild an 8 spd trans - mostly for my future reference. The manual is great, but a lot of the pics were blurry so I decided to make may own. Enjoy, and this may take a few days to get the entire post complete. This is an edit of this post but I think a picture of our final goal should be first. This is only going to be a description of the steps for the inside gears. The instruction manual which you can download is pretty clear for the rest. Oh yeah, I put a glob of grease on the end of eveything before I put it back in. Not sure if this is the correct thing to do, but made the assembly easier. more to come... Share this post Link to post Share on other sites
gattonde 1 #3 Posted July 21, 2010 Great detail and explanation. This will come in handy for alot of us. Thanks, Dan Share this post Link to post Share on other sites
Save Old Iron 1,566 #4 Posted July 21, 2010 Outstanding writeup - very helpful :D Share this post Link to post Share on other sites
SAM58 30 #5 Posted July 21, 2010 needed.... have one that needs rebuilt, may get my nerve up by winter... thanks :D Share this post Link to post Share on other sites
rickv1957 72 #6 Posted July 21, 2010 Great lesson for a trans rebuild! Rick Share this post Link to post Share on other sites
Duff 206 #7 Posted July 21, 2010 Great work, and very useful! Thanks so much! Duff :thumbs: Share this post Link to post Share on other sites
stevasaurus 22,862 #8 Posted July 21, 2010 Great pictures and explanations. Thanks for sharing. :thumbs: Share this post Link to post Share on other sites
dgjks6 6 #9 Posted July 22, 2010 This completes the installation of the gears inside the transmission. For here, just put in the differential, test, seal, add fluid, test, install detent plug, install pulleys, install handles, test, and put back on tractor. Let me know if you think pics of those steps are needed. I got a lot of pics. Share this post Link to post Share on other sites
JimD 3,345 #10 Posted July 22, 2010 Greg, I would like to see the entire process in pics if you don't mind. I'm sure it would be helpful to many here. Thanks for a great thread. :thumbs: Share this post Link to post Share on other sites
tmix 34 #11 Posted July 23, 2010 thank you for the show. Had no idea You made that LOOK to easey I hope can do that someday nice pics T MIX Share this post Link to post Share on other sites
