AMC RULES 37,134 #26 Posted June 5, 2012 Thanks for sharing your tranny rebuild with us here. Sure wish I could be as brave as you. Share this post Link to post Share on other sites
WH854 44 #27 Posted June 5, 2012 would this be the same as in a 1985 312-8 mine just locked itself in low If you are talking about the HI-LO shift fork!! Yes Chas Share this post Link to post Share on other sites
noncritical 5 #28 Posted June 6, 2012 thank you and thanks for the pictures not sure if i will tackle it right now or hunt around for a used trans have to see what will fit in it Share this post Link to post Share on other sites
Joefrommi65 18 #29 Posted April 14, 2014 A little late but,this is a great write up thanks for taking the time!!!!! Share this post Link to post Share on other sites
Desko 610 #30 Posted July 1, 2014 Yea great write up wish I found this thread when I bought my trans from the big show its still sitting in the garage waiting for a gasket and seals had to replace the 1533 bearing and the reverse gear but it was pretty self explanatory to tear it down and put it back together. Also why did this thread just quit so suddenly? Share this post Link to post Share on other sites
