suxatpball 0 #1 Posted May 29, 2010 would it be a problem to run a cheap 12v winch on my B80. Im thinking the cheap ones from harbor freight. Im wanting to hook one up to plow snow and also to operate my clevis hitch. Would these be too much of a strain on my electrical sys? Share this post Link to post Share on other sites
jla1257 2 #2 Posted May 31, 2010 Not sure how a winch would run a clevis hitch but you might want to check out the link below for a 12V actuators. They are offered in a 3 15/16, 7 7/8 or 11 13/16 inch strokes. http://www.northerntool.com/shop/tools/cat...tility-trailers Share this post Link to post Share on other sites
rwilson 128 #3 Posted May 31, 2010 the acuator would be the best way unless you wanted to add hydrolics to the tractor. check this out. http://www.wheelhorseforum.com/index.php?showtopic=2885 Share this post Link to post Share on other sites
suxatpball 0 #4 Posted June 2, 2010 was this a wh product? where can i find this? Share this post Link to post Share on other sites
jla1257 2 #5 Posted June 2, 2010 No, not a WH product. See the following link, scroll down towards the bottom of the page. There are three different size actuators.: http://www.northerntool.com/shop/tools/cat...tility-trailers Share this post Link to post Share on other sites
