417-8 Transmission

[stamplicker 0]

I have a Wheelhorse 417-8 that the gear shift leaver pulls out of the transmission case. Can anyoue give me some information as to how to repair this? Can complete new transmissions be purchased and if they can who sells them. I could also use a parts break down if available. Thanks.

Luther

[rickv1957 72]

Hello and There is a little set screw that holds shifter in,located at where shifter ball sets in trans,easy fix,Rick

[rickv1957 72]

Set screw bottoms into hole on front side of shifter ball, just snug up enough that shifter movement does not get too tight,then tighten jam nut, Rick

[Duff 206]

Hi, Luther and !

Just so you don't think the set screw is broken off, it actually takes a small Allen wrench to loosen/tighten it.

As to assembly drawings, go to:

https://lookup3.toro.com/partdex/index.cfm?xCaller=Toro

and enter 31-17K801 in the Model Number window.

Good luck!

Duff :D