jpmcleod 4 #1 Posted May 12, 2010 I hate to post this on this site portion but just about everybody reads these. I searched the classified and can't find it again. Someone wanted a knob for the frount pully adjustment and I can't find his post. I have one without any cracks. If you read this and still need one, reply and I will get it to you. I tried to get it off the belt pulley housing but I am afraid I will break the knob. The pin will not move. I have it soaking in blaster. If it gets broken, I would perfer you did it. Share this post Link to post Share on other sites
mflowers 85 #2 Posted May 14, 2010 I am not the original poster but if you don't get rid of it, I can use one for '76 C-160. Thanks! Share this post Link to post Share on other sites
jpmcleod 4 #3 Posted May 14, 2010 I have it and you need to e-mail me @ jerry.pugh5170@yahoo.com. I left it intact with the pullys and could ship the whole works. I was afraid of breaking the knob. You could put your pullys on this one if you want to. I have a total of 3 but the other2 have broken knobs. Your free if you want 1 or 3. Share this post Link to post Share on other sites
jpmcleod 4 #4 Posted May 15, 2010 Mflower. I found you a knob in a box of parts today. It is not cracked or broken and is off the shaft. E-mail me if you want it at no cost. My e-mail address is in my first response to you. Share this post Link to post Share on other sites
rickv1957 72 #5 Posted May 16, 2010 Knob is still available new,Rick Share this post Link to post Share on other sites
mflowers 85 #6 Posted May 17, 2010 Sent email, Thanks! Share this post Link to post Share on other sites
