How do I change drive belt on a 520?

[Torino 14]

How do I change the drive belt on a 520?

[bo dawg 516]

You will have to take the side panel off and remove the PTO bracket to remove belt from pully, then pull belt from pump pully and thats it. Really easier than it looks.

[Torino 14]

Yea, was not that hard. Forgot to mention mine is an '87 model. I took off the rear wheel and foot rest to make it easier. The hardest part by far was getting the pto break back on, it's a little tight in there trying to get the nuts back on the bolts . That took longer than all the rest combined.