Jump to content
Sign in to follow this  
rusted and busted

suburban on steriods?

Recommended Posts

rusted and busted

hello ,found a new horse to add to the herd.not sure what year it is,nice solid machine,appears some one pulled with it as the motor is a 7 horse briggs,shoe horned into the frame work.it rolls backs wards fine but forward seems to be locked up....any ideas???

P1010026.jpg

P1010025.jpg

P1010027.jpg

Share this post


Link to post
Share on other sites
 
CasualObserver

Just by the cast foot rests and clutch pedal, hood with large circular hole and push/pull control holes and hoodstand, its a 401,

Share this post


Link to post
Share on other sites
 
Hammerhead

That's a 1961 401 looks like to me. It has part of the snow blade mount on the front of the frame. It also has the ultra rare early 1961 style footrest's. You don't find this kind very often. Compare them to most 1961 style footrest's and you'll notice a couple things that are different. Hard to find parts right there! Good haul today! Good luck with the rebuild if you decide to restore it.

:omg: KJ

Share this post


Link to post
Share on other sites
 
rusted and busted

:omg: thanks for the info ,i have a badly surface rusted suburban with the origional motor, i think its a k91,is that what this came with? btw :D

Share this post


Link to post
Share on other sites
 
rickv1957

Nice find there!,Rick

Share this post


Link to post
Share on other sites
 
Coadster32

Like the others said, 401. No doubt. Good pickup. :omg:

Share this post


Link to post
Share on other sites
 
Roger from southern Iowa

Like others have said, great find!!

I haven't been fortunate enough to own one of these so I don't know what to tell you on the trans. :omg:

Share this post


Link to post
Share on other sites
 
tgranthamfd

Wonder if the shifter broke off inside the tranny in reverse?? :omg: Might try pulling the shifter out and aligning the slots in the neutral position with a big ole screwdriver. Then again it might be a little worse.

Share this post


Link to post
Share on other sites
 
tgranthamfd

Wonder if the shifter broke off inside the tranny in reverse?? :omg: Might try pulling the shifter out and aligning the slots in the neutral position with a big ole screwdriver. Then again it might be a little worse.

Those 3 piece tyranny's are not to bad to work on.

Share this post


Link to post
Share on other sites
 
wheelly

Really nice nice find !!

Share this post


Link to post
Share on other sites
 
VinsRJ

:omg: thanks for the info ,i have a badly surface rusted suburban with the origional motor, i think its a k91,is that what this came with? btw :D

A K91 would be original to a 60-61 Surbuban 400 or 401. If the Kolher ID Tag is still affixed to the blower cover, post up the SPEC#.

Good score. :D

Share this post


Link to post
Share on other sites
 
Gene_S

Nice find rusted and busted :D

Atleast they raised the hood up instead of cutting to make the motor fit :omg: Which seems like everyone who knows no better does...

Share this post


Link to post
Share on other sites
 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

×
×
  • Create New...