8 speed trans swap

[algrc120man 0]

does any one have an 8 speed trans to fit my c-120 it is currently a hydro that went wrong it is also a 1974 i have the pully and clutch pedal and disconect arm from a work horse chassis but i dont know if they will work on this machine. :omg:

[rmaynard 15,595]

Where are you located?

Bob

[Kelly 1,029]

Let us know where you are, I have rolling frames with about everything you would need to make the swap.

[algrc120man 0]

Hey guys thanks for the responses im in midwestern ohio but going on a small weekend drive would not be out of the question so long as we are not in the field for planting yet then it be a while. :omg:

[rickv1957 72]

An 8 speed chasis would make an easy swap!!,Rick

[Kelly 1,029]

PM sent

[Kelly 1,029]

You will need the trans, clutch/brake parts, engine pulley, belt guard, new belt, your tractor should have the flip up fender, I think your tool box will bolt to the 8 speed and keep you fender set up, might want to swap out the dash tower, not sure how all that will work with a stick shift? You know what you need is a tractor that needs a engine :omg:

[Horse Rancher 0]

I do know you will need to swap the tower the hydro tower

is about an inch taller if you get all the parts it's a straight

forward bolt and go swap :omg:

[algrc120man 0]

thanks for all of your input guys sounds to be a bit of an undertaking maybe i should try to find a pump assy for it instead i think it is an eaton pump or a sunstrand not certain dont remember now. :omg: