chris11 184 #1 Posted March 31, 2010 I have a 8 speed trans with 1 1/8 axles i want to get bearings for it. can anyone help? Mike its the trans i got from you. Is the a model number for it????? Share this post Link to post Share on other sites
stevasaurus 22,861 #2 Posted March 31, 2010 Page through this manual...it is all there. Look for 8 speed and axles that are 1 1/8". http://www.mywheelhorse.com/graphics/file/...1958_-_1982.pdf Pay attention to where the drive pulley and brake drum shaft come out of the casing. Sometimes it is different, but the guts may be pretty much the same...the casings are pretty much the same. Also, measure the length of axle sticking out of the trans...compared to the hubs. A little detective work..but it is all there. If you still have questions...post. :D Share this post Link to post Share on other sites
Sparky-(Admin) 21,405 #3 Posted April 1, 2010 Chris, that tranny was out of a 1983'ish C-85 Black Hood. Tractor model# was 11-08K801. Go here, https://lookup3.toro.com/partdex/index.cfm and enter the model # I gave ya. Theres a list of all the parts in that tranny. Mike............ Share this post Link to post Share on other sites
chris11 184 #4 Posted April 1, 2010 Guys thank you for your help. :D Share this post Link to post Share on other sites
