finn 0 #1 Posted March 28, 2010 Good day, My name is Patrick and I live in Rockford MI, just bought a WH 416-8 {3116o801/37288}. yesterday and had a few questions, 1st can anyone tell me if any of this bracketed number is the serial number.2ND what year it is. And lastly does anyone have of a copy of a owners manual. Thanks in advance Patrick. :D Share this post Link to post Share on other sites
rmaynard 15,455 #2 Posted March 28, 2010 First of all Patrick, welcome to RedSquare. Your 31-16O801 is a 1988. Owners manual doesn't seem to be available from Toro, so maybe one of our members has one and will share a copy with you. Bob Share this post Link to post Share on other sites
rickv1957 72 #3 Posted March 28, 2010 Hello and Rick Share this post Link to post Share on other sites
Roger from southern Iowa 1 #4 Posted March 28, 2010 A manual will come available, I'm sure. :omg: Share this post Link to post Share on other sites
Brrly1 1,146 #5 Posted March 28, 2010 :omg: Welcome to Red Square. There are alot of Good Ol' Boys here in this group that will step right in and give you a hand. Alot of Horse knowledge here also. Nine times out of ten they know what there talking about. Good Luck with you new horse I am sure you will enjoy it. See Ya, Bye Burly :D Share this post Link to post Share on other sites
wallfish 16,996 #6 Posted March 28, 2010 :omg: Patrick You can check out MikesRJ's manual site. http://www.mywheelhorse.com/ And you can check out the Toro site here with your model# 31-16O801 https://lookup3.toro.com/partdex/index.cfm?xCaller=Toro Share this post Link to post Share on other sites
Sparky-(Admin) 21,315 #7 Posted March 28, 2010 Enter the model number that Bob gave you here https://lookup3.toro.com/partdex/index.cfm You can get part numbers and a list of attachments for your machine. Mike....... Share this post Link to post Share on other sites
markslawnmowerworld 4 #8 Posted March 28, 2010 :omg: and your wheel horse is a 1989 model not an 88 you have a 16 horse power oppossed twin onan on it as well..... you can run this model #31-16o801 through toro master parts viewer on the internet to find parts look-ups and diagrams......the o in your model vin# represents the onan engine you have. :D Share this post Link to post Share on other sites
rmaynard 15,455 #9 Posted March 28, 2010 and your wheel horse is a 1989 model not an 88 My bad. Didn't have my glasses on when I researched the number. Yours is a 1989. 8's, 9's, B's, 3's, they all look the same without these Thanks for correcting me Mark. Bob Share this post Link to post Share on other sites
gwgdog66 23 #12 Posted March 29, 2010 :omg: Hey We love seeing them pictures :D Share this post Link to post Share on other sites
Horse'n Around 22 #13 Posted March 30, 2010 Welcome to RedSquare Patrick! John Share this post Link to post Share on other sites
bitten 134 #14 Posted March 30, 2010 Hello and :omg: Share this post Link to post Share on other sites
mcwh1950 2 #15 Posted March 30, 2010 Patrick first off second if you go to this web page https://lookup3.toro.com/request/request.cfm put in 31-16O802 for the serial number and none for the model number and you will be able to down load the operator's manual. It's the same manual for the 1989 model except the wire diagram. if you pm or e-mail me you address i will copy the wire diagram out of my book and send it to you. Share this post Link to post Share on other sites
Suburban 550 28 #16 Posted March 30, 2010 :omg: Patrick. Share this post Link to post Share on other sites
dclarke 4,032 #17 Posted March 30, 2010 Patrick, good luck with your :D Share this post Link to post Share on other sites
tommy3horse 3 #20 Posted March 30, 2010 Good Day and Alot of folks here to assist you! Tom :omg: Share this post Link to post Share on other sites
