knap83 0 #1 Posted March 21, 2010 I have a 1979 c111 with an 8 speed. The trans grinds going in and jumps out of gear. I am wondering if I can find parts for this any were or if i have to locat a new trans axle. Thanks Share this post Link to post Share on other sites
TT-(Moderator) 1,145 #2 Posted March 21, 2010 :D Is the drive belt stopped completely when you're trying to put it in gear? What gear(s) does it jump out of? Unless it was previously changed, the C-111 should have the 103916 Uni-Drive transaxle. That tranz was used in many tractors (and a lot of the individual pieces were used in many more models) and there should definitely be some parts floating around. You'll have to split it and see what you need first though. :omg: Share this post Link to post Share on other sites
knap83 0 #3 Posted March 21, 2010 It jumps out of all gears. The belt is stopped when shifting. I will pull it and split the case. This is my first horse. I like it better than my 200 series deers so far. After I upgraded the briggs to a 12hp kohler. Share this post Link to post Share on other sites
WH nut 553 #4 Posted March 23, 2010 Hey Knap, I have a number of a guy up near Bay City that has some transmission cheap Share this post Link to post Share on other sites
rickv1957 72 #5 Posted March 24, 2010 Hello and Rick Share this post Link to post Share on other sites
Roger from southern Iowa 1 #6 Posted March 24, 2010 This is the place to locate your parts and . Share this post Link to post Share on other sites
