more B-80 pics

[blaster 0]

Hi guys, thought I'd post some more pics. This is where I started

So far everything except the sheet metal has been cleaned, sanded and painted. It's too cold here to spray outside. All new seals and gaskets, engine torn down and cleaned up( after 30 yrs it was still like new inside). Marvel Mystery Oil cuts right thru carboned up rings!

Right now I'm working on the rims. Got them sand blasted and am going to fill in some pitting with body glaze and then paint I H white (close to almond). Got new Deestone ags for the back

and Deestone turf tread for the front

I'm sure by now I've messed up these pics by trying to post so many. I'll put some more on when I get the wheels done. Thanks ...Glenn

[rickv1957 72]

Glenn,very nice work,looks great,what refinish was used on pto parts, Rick

[rmaynard 15,715]

Looks great so far.

Bob

B)

[DMK855 15]

Nice Job!! B)

[blaster 0]

Glenn,very nice work,looks great,what refinish was used on pto parts, Rick

Hi Rick, The PTO levers and other rods were sanded and painted with Design Master super silver plate. My wife got it for me at a craft store. It's the closest thing I've seen to the original look and surprisingly tough.....Glenn

[KeithB 6]

Very nice work, love the detail! :party:

[Coadster32 793]

Looks great. Thanks for the pics! B)

[rmaynard 15,715]

Glenn,

The B-80 looks great. I am starting on my B-100 this weekend. I don't think we are going to have anymore snow.

I don't know if anyone asked, or if you mentioned it and I just missed it, but what are you using for paint?

Bob

[rickv1957 72]

Glenn,the silver plate does look very good!!!! thanks Rick

[blaster 0]

Glenn,

The B-80 looks great. I am starting on my B-100 this weekend. I don't think we are going to have anymore snow.

I don't know if anyone asked, or if you mentioned it and I just missed it, but what are you using for paint?

Bob

Hi Bob, I'm using Valspar IH red rattle cans on the smoother/bigger parts and brushed the frame, trans,and other parts I thought would get alot of chips. Hope you have fun with your 100 and if I can offer any advice, just ask. Glenn