418-8 Info

[lotus1967 0]

I have a 418-8 WH which is used for mowing and leaf pick-up with a PECO 5 hp vac. For the rest of the year it's a garage queen. Currently have 365 hours on the meter. I see so little info on the site regarding any of the 418 models and am wondering if it is because it wasn't a desirable model, or was the production run so short? Can't even find parts, or maintenance info. Can anyone help guide me to sites where I can get parts lists, diagrams, and maintenance help please.

I'm in SW Ohio. Dealer help would also be appreciated.

[markslawnmowerworld 4]

I see you have access to the internet..so with that you should be able to find everything you need.......start by visiting toro......on the net and look for the master parts viewer....from there type in your wheel horse vin#

and you should start finding all your info....

or someone on here will post all that for you in a matter of time B)

[markslawnmowerworld 4]

If you don't know your vin# 31-18k801 this one will work. B)

[DoctorHfuhruhurr 137]

I have a 418-8 WH which is used for mowing and leaf pick-up with a PECO 5 hp vac. For the rest of the year it's a garage queen. Currently have 365 hours on the meter. I see so little info on the site regarding any of the 418 models and am wondering if it is because it wasn't a desirable model, or was the production run so short? Can't even find parts, or maintenance info. Can anyone help guide me to sites where I can get parts lists, diagrams, and maintenance help please.

I'm in SW Ohio. Dealer help would also be appreciated.

This site is handy.....

http://www.partstree.com/parts/?lc=toro_consumer&mh=19

The prices aren't very good on that site but it will get you the part numbers that you can use to search ebay and elsewhere for.

[rickv1957 72]

Sounds like a very nice tractor! Rick

[Sparky-(Admin) 21,300]

I believe the 418's were only made for one year (1987) which is probably why you dont see much info on them.

Mike........