garybllrdr 0 #1 Posted February 18, 2010 can anyone give me the size or a part number for the front wheel bearing for my c125 from tsc or somewhere since here in texas n9ot many wheel horses to be seen (actually only seen one other in a junk pile of local lawn repaire guy still havnt got him to come off that one yet. one a side note my c125 has been impressing lots of people here with me using it to push and spread sand clay and even crushed concrete for the driveways of the property's i take care of. Share this post Link to post Share on other sites
rmaynard 15,421 #2 Posted February 18, 2010 Old part number is 108483. New part number is 110513, available from Toro. ID: 0.750" OD: 1.375" Height: 0.527" Bob Share this post Link to post Share on other sites
rmaynard 15,421 #3 Posted February 19, 2010 You might find the following thread interesting if not confusing. http://www.wheelhorseforum.com/index.php?...=wheel+bearings Bob Share this post Link to post Share on other sites
rickv1957 72 #4 Posted February 19, 2010 one a side note my c125 has been impressing lots of people here with me using it to push and spread sand clay and even crushed concrete for the driveways of the property's i take care of. Thats a wheelhorse for you! Rick Share this post Link to post Share on other sites
gwgdog66 23 #5 Posted February 19, 2010 Napa can get them for you. PN# SME 704133 http://www.napaonline.com/Search/Results.a...umber&Nty=1&N=0 Share this post Link to post Share on other sites
garybllrdr 0 #6 Posted February 21, 2010 thanks napa had them in stock and i actually had a napa store only 14 miles away concerdering evrything is 40 miles or more away for anything else food ect. got the c-125 back up and going very fast and back to owrk spreading more sand. Share this post Link to post Share on other sites
