lift system

[boatman 3]

:party:

I just purchased a electric lift actuator for my wheel horse

c-125 8 speed tractor. I use this pretty much in the garden and the

mold board plow and tiller are pretty heavy. I also have a rear mount

grader blade for it. I am wanting to convert this maual lift to the

electric lift. I need the part of the rock shaft that replaces manual lever.

same as on hydraulic lift. I find out that they are no longer available

new anymore. was just wondering if someone had one they wanted

to sell? I suppose this part could be made if I had some specs

[rickv1957 72]

You will see that rockshaft now and then on ebay,good luck,Rick

[boatman 3]

B)

Thanks Rick. I just went thru ebay and they haven't had one for awhile.

I'll keep on looking tho. They do show a rock shaft for a 520h and it is still available

for $ 34.00 . However the notch where cylynder is pinned on is on the back side

instead of front side. Does the 520H mount the hydraulic cylynder in a

diferent place than say a 312H like mine?

[gwest_ca-(File Mod) 11,031]

You can download a 16 page manual from Toro for the 1991-2004 model. Go to

https://lookup3.toro.com/request/request.cfm

Use 84225 for a model number and type the word none in the serial # box.

Garry

[TT-(Moderator) 1,131]

I suppose this part could be made if I had some specs

Seek and ye shall find:

http://www.wheelhorseforum.com/index.php?...=0entry119119

I'll bet he can get you some dimensions. B)

[boatman 3]

B)

thanks for info on electric lift. I went to site and down loaded parts list

and pictuures & instructions. This helped alot. looks like I need the

bracket that bolts to frame and new rock shaft. also new side cover and

cltch rod. I can wire it ok and use a mom off mom double pole switch

to accomplish reverse polarity to make actuator run either direction. I

might be able to fabricate a little on side cover and not have to purchase

that.