dandan111 31 #1 Posted February 2, 2010 My engine cover does not have a hole in it to run the fuel line. How should the gas line be ran,just in front of the cover or routed under the motor and up to the fuel pump? Share this post Link to post Share on other sites
Michael Bullington 5 #2 Posted February 3, 2010 i guess my first question would be is this a tecumseh h60 engine? If yes i would run the line in front of the cover....but even better i would probably just drill out the ends of the Cover and make it look Original http://www.wheelhorseforum.com/index.php?showtopic=6764 Michael Share this post Link to post Share on other sites
dandan111 31 #3 Posted February 3, 2010 It is a 6 hp tecu. It looks like the original cover it has the sticker in place. I ran the line in front of the cover and it looks like crap and is in the way of the pull start. I saw a picture that had the fuel line ran on the muffler side of the engine.My fuel pump looks like it is not situated in a good posistion for this. Any more opinions before I get the drill out? thanks for the help guys Share this post Link to post Share on other sites
