HankB 16 #1 Posted January 27, 2010 Can anyone tell me the maximum backspacing for a wheel on a 314-H? I have a line on a pair of rear wheels and have asked the seller to put the wheel flat on the floor and measure the height of the middle part. He gets 3 1/2". Tomorrow I can pull a wheel off my tractor. (I'm not excited to go out and do this tonight - 12 Share this post Link to post Share on other sites
Cody 276 #2 Posted January 27, 2010 I think with that back spacing the tires are going to be hitting the gas tank or be very close to rubbing it. They look like a set of cub cadet rims Share this post Link to post Share on other sites
Kelly 1,029 #3 Posted January 27, 2010 I'm 99% sure those will NOT fit the centers are welded in backwards compaired to WH Share this post Link to post Share on other sites
stevebo-(Moderator) 8,330 #4 Posted January 27, 2010 I am not 100% sure but 2.5 inches sounds correct. Share this post Link to post Share on other sites
HankB 16 #5 Posted January 27, 2010 Thank you for the replies. Looks like I'll have to keep looking (or just put ags on my existing rims.) best, hank Share this post Link to post Share on other sites
Horse Rancher 0 #6 Posted January 27, 2010 I believe stock is1" or 1.5" I have 2" spacing and its close hope this helps :thumbs: Share this post Link to post Share on other sites
