Starting B80 Restoration

[jdwheelhorse 0]

Hello, I am thinking about starting a complete restoration on my B80 that currently looks like a john deere

So, for those of you who have used the Valspar paint, what exactly is the difference in the restoration series and just the regular implement&tractor paint?

Other than the price difference.

I am planning on using IH Red and spraying the little parts and brush painting the hood, fender, frame, and other large parts.

For those who have used the gallon of paint, roughly how much did it cover and how well?

Thanks.

-JD

[rickv1957 72]

I believe the restoration series paint has a hardener added,Rick

[jdwheelhorse 0]

I believe the restoration series paint has a hardener added,Rick

So would it be worth it to fork out the extra cash and use it?

[rickv1957 72]

That would be just my opinion Rick

[jdwheelhorse 0]

Alrighty Thanks!

This is gonna be a huge chore.... :thumbs:

[sorekiwi 761]

There is a ton of threads (arguments?) about the two types of Valspar.

I have used both, and from a rattle can and a paint gun. In my opinion, the "Restoration Series" paint goes on a lot smoother and ends up a lot glossier.

If you are going to use a gun, both types have their own hardeners. I use the hardener if I'm going to use a gun. The hardener makes it dry quicker as well as toughening it up.

I guess you mean the quart can when you say gallon? IIRC you will use less than a quart on a tractor.

[Sparky-(Admin) 21,510]

IIRC you will use less than a quart on a tractor.

Can you tell me what IIRC is supposed to mean?

Mike.......

[jdwheelhorse 0]

I may use a gun, never have so I dont know much about them. Can u just buy a quart and use that or do you have to thin it out. and add stuff? Im clueless.

[sorekiwi 761]

TSC has the thinner and the hardener. Mix it up as per the instructions on the can and have at it!

[Gene_S 93]

Hey Sparky... I think IIRC means "If I Remember Correctly". Is that right Mike?(sorekiwi)

Gene

[sorekiwi 761]

I think IIRC means "If I Remember Correctly". Is that right Mike?(sorekiwi)

Thanks for the translation Gene. Yes, thats what I meant.

Sorry, one slipped through.

And instead of TSC I guess I should write "Tractor Supply Company".

[bmuone 15]

Hey JD and good luck with the restore. One thought about the painting and that is using a primer. There was a thread here where someone used a red primer with would help disguise small scratches. Can't remember who it was.....maybe they'll check in.

[jdwheelhorse 0]

Ok, Ill go look this weekend and see what i can find. I will keep progress posted if i decide to carry out the restoration.

[jdwheelhorse 0]

There is a ton of threads (arguments?) about the two types of Valspar.

I have used both, and from a rattle can and a paint gun. In my opinion, the "Restoration Series" paint goes on a lot smoother and ends up a lot glossier.

If you are going to use a gun, both types have their own hardeners. I use the hardener if I'm going to use a gun. The hardener makes it dry quicker as well as toughening it up.

I guess you mean the quart can when you say gallon? IIRC you will use less than a quart on a tractor.

You say use less than a quart on the whole tractor when spraying correct?

[sorekiwi 761]

You say use less than a quart on the whole tractor when spraying correct?

Now you've got me doubting my memory!!

I'm pretty sure I used less than a quart on the last one I did, however it was an early Lawn Ranger which doesnt have as much sheet metal as a B-80.

Also a lot of the small bits (pedals, steering column, tie rods etc) I sprayed with a rattle can as soon as I got them ready. I hate having a big pile of bits lying around, so I'd rattlecan the little bits so I could put them on the tractor straight away. Clean up with a spray gun is a bit of a chore, so I only used the gun for the big bits.

I really wanted to be sure the hood, gas tank and beltguard matched, so I painted them all at the same time, I think I only put 3 coats on the top sides and 2 on the bottoms.

[Kelly 1,030]

I painted 2 complete tractors with a gallon of valspar resto. paint thined to spec, and sprayed, and that was every nut, bolt, clip, engine parts, ect........inside and out. Good luck

[MikesRJ 552]

IIRC you will use less than a quart on a tractor.

Can you tell me what IIRC is supposed to mean?

Mike.......

http://www.google.com/search?hl=en&q=defin...f&aql=&aqi=&oq=

[hotrodmerc 1]

I am hoping this thread progress well with pics. I am about to start on a B 80 myself.

[jdwheelhorse 0]

I am planning to start on the little parts first (the ones that will take the most time)

And then when i get a sprayer I will do the hood, fenders and other large parts. I really want to just brush paint it, is that possible with enamel? I know someone who painted their engine bay on their truck like that and it looked decent.

JD

[W9JAB 156]

:banghead:

:thumbs:

[MikesRJ 552]

I am planning to start on the little parts first (the ones that will take the most time)

And then when i get a sprayer I will do the hood, fenders and other large parts. I really want to just brush paint it, is that possible with enamel? I know someone who painted their engine bay on their truck like that and it looked decent.

JD

You're better off spraying than brushing ... my two cents worth.

Good luck and lets get some pictures ...

:banghead:

[jdwheelhorse 0]

Well youll just have to wait my friend. I havent even gotten any paint or even started tearing down. I hate to get everyones hopes up, but i may start this and it may be too much work for me.

[rickv1957 72]

One step at a time= good results! Rick

[can whlvr 993]

if you want to brush it on ,from my limited expience the enamels dont brush well,i did my wagon and was not happy with how it laid down,i would use something that dries slower so it can flatten out,and put it on light so it wont run,maybe there is some enamel paint that u can brush but hopefully someone else could chime in.

[jdwheelhorse 0]

One step at a time= good results! Rick

Exactly, and the main reason I'm not starting yet is because I use the tractor to plow snow, so I have to have it together and running. Im getting some rattle cans this weekend to do the PTO pully, and related parts, and maybe some of the accessible parts right now. Thats all for right now. I might get a start on sanding down the hood this weekend though.