Jump to content
Sign in to follow this  
gattonde

702 Transmission Seal Wanted

Recommended Posts

gattonde

I am replacing all the transmission oil seals on my 702. I cannot locate a place to purchase the drive pully oil seal Wheel Horse Part #1303. Does anyone know where I can get one or any replacement part numbers.

Thanks,

Dan

Franklinville, New Jersey

Share this post


Link to post
Share on other sites
 
Indy w h

You might try NAPA. Just take your old one with you

and they can match it.

Indy

Share this post


Link to post
Share on other sites
 
gattonde

One more question. The manual states to use #40 Gear Oil in Transmission. I have been using 90 weight gear oil in my C-160. Is that the same as #40 Gear Oil.

Dan

Share this post


Link to post
Share on other sites
 
pfrederi

Manuals of that period frequently called for 40 wt motor oil for the rear end. Later the recommendations were changed to more regular gear oil. My 67 Lawn ranger has been using 40 wt motor oil since she was new with out any problems and she shifts easily in the winter.

Your seal 1303 crosses to CR 7410 (.75 shaft .999 bore 0.125 thick)

Share this post


Link to post
Share on other sites
 
Indy w h

I've been using 80-90 coastal gear lube for years!!!

Never had a problem :thumbs:

Indy

Share this post


Link to post
Share on other sites
 
gattonde

Thanks for the info. Gotta love this site.

Dan

Share this post


Link to post
Share on other sites
 
Lane Ranger

:thumbs:

On the Red Square website there is a very handy reference any time you are looking for a new oil seal.

It is listed under:

Wheel Horse Links, Links to your favorite Wheel Horse sites

There is a list of Parts Suppliers

http://www2.chicago-rawhide.com/popup_part...okup_457012.htm

SKF Chicago Rawhide has a wheel horse seal cross reference.

Just plug in your seal number and a new number will generally popup that you can take to NAPA or some other autoparts company or oil sealer supplier.

Share this post


Link to post
Share on other sites
 
gattonde

Thanks Lane Ranger, I have saved that site as a favorite.

What gear oil do you use in your ranger?

Dan

Share this post


Link to post
Share on other sites
 
rickv1957

I use 90 wt in the manual trans,Rick

Share this post


Link to post
Share on other sites
 
linen beige

The manual states to use #40 Gear Oil in Transmission

:thumbs:

The manual for my 702 says S.A.E. 90 Gear Lube. I'll bet yours does too, but your "9" may look like a "4".

The lube recommendation chart published later calls for SAE 90-140 A.P.I. service GL-5 gear lube.

Gear Lube is not the same as engine oil.

Share this post


Link to post
Share on other sites
 
stevasaurus

:WRS: :wwp::lol::banghead: thought I forgot...didn't you. :thumbs:

Share this post


Link to post
Share on other sites
 
Lane Ranger

I use 90 weight gear oil in the Unidrive of the Lawn Ranger.

Share this post


Link to post
Share on other sites
 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

×
×
  • Create New...